Table of Contents
Advertisement
Installation
Hard-Disk Drive Test
A sequential read test is carried out to check the hard-disk drive(s).
■ - ■
----------------- MAINI V4.30c ------------------—
»
S E Q U E N T I A L
R E A D
T E S T
20.04.1988
13.46.23
Harddisk: 1 ,
C y l i n d e r s : 0-731,
S e c t o r s : 1-119,
R e t r i e s : 0
Sequential read t e s t s t a r t e d , t e s t number 1 .
<ESC> = Stop the te s t
C y l .
Sector
R/W Cycle
1
1-119
R
1
Error Log
When the last test is completed, an error log is displayed.
If any errors were encountered in the tests, the errors are listed in the
error log. This can also contain warnings. A warning is issued when
the program tries to test a unit that is not installed. Such a warning
does not mean that anything is wrong. However, a warning may also
be issued if there is a malfunction serious enough to make the
program assume that a particular unit is not installed. Thus, you
should check all warnings as well as the error messages listed in the
error log.
If more error messages and warnings are displayed than there is
room for on the screen, you can use the
up arrow
('f),
down arrow
(xL),
PgUp, PgDn, Home
and
End
keys to scroll the error log.
2-20
Advertisement
Chapters
Table of Contents
