Nokia Alfaskop TT/386 User Manual page 5

Preface
Software
The Operating System
The Alfaskop TT/386 runs under the disk operating system MS-
DOS, version 3.30, or a later version, OS/2, or UNIX operating
systems. In this manual it is assumed that MS-DOS is used; other
operating systems are not dealt with.
The Setup and Maintenance Programs
A diskette labeled Setup and Maintenance is delivered with the
Alfaskop TT/386. It contains two programs: Setup and
Maintenance.
The Setup program is to be used after the system has been installed
for the first time to specify what hardware options are installed, and
to set the date and time of the clock and calendar. The setup
information is stored in a CMOS (Complementary Metal Oxide
Semiconductor) memory that is an integral part of the battery-
backed-up clock and calendar. You will also have to run the Setup
program later on if you add or remove hardware options, or if you
want to change a configuration parameter. You will find the
information on a sticker labelled SETUP INFORMATION on the
back panel of the system unit.
The Maintenance program can be used at any time to check whether
the system is operating properly. You should always run the
Maintenance program after you have run the Setup program in
connection with the installation of the system.
iii