Toro 07433LT Operator's Manual page 13

Parking-Brake Lever
The parking-brake lever is located on the control
panel (Figure 7).
Whenever you shut off the machine, engage the
parking brake to prevent the machine from accidentally
moving. If the machine is parked on a steep grade,
ensure that you engage the parking brake.
To engage the parking brake, pull the parking-brake
lever toward you (Figure
1. Parking-brake lever
To disengage the parking brake, push down the
button on top of the parking-brake lever, pull the
parking-brake lever toward you to release pressure,
and then push the parking-brake lever forward
9).
1. Parking-brake lever
Direction Selector
The direction selector is located to the left of the
parking-brake lever. The direction selector has 2
positions: F andR
ORWARD
Important:
Always stop the machine before
changing direction.
8).
Figure 8
Figure 9
(Figure 7).
EVERSE
Horn Switch
The horn switch is located on the control panel
7). Press the horn switch to sound the horn.
Light Switch
Use the light switch
headlights. Push the light switch up to turn on the
headlights. Push the light switch down to turn off the
lights.
USB Port
Use the USB port
Important:
insert the rubber plug to prevent damage to the
port.
Key Switch
Use the key switch
g033923
machine.
The key switch has 2 positions: O
the key clockwise to the O
machine. When you stop the machine, rotate the key
counterclockwise to the O
machine. Remove the key whenever you leave the
machine.
(Figure
g033924
13
(Figure 7) to illuminate the
(Figure 7) to power mobile devices.
When you are not using the USB port,
(Figure 7), to run and shut off the
N
position to operate the
N
position to shut off the
FF
(Figure
and O . Rotate
FF