Checking The Transaxle-Fluid Level; Changing The Transaxle Fluid - Toro 07433LT Operator's Manual

Checking the
Transaxle-Fluid Level
Service Interval: Every 100 hours—Check the
transaxle-fluid level.
1. Remove the fill plug on the transaxle
Note:
The fluid level should be even with the
bottom of the fill plug.
Figure 54
1. Fill plug
2. If the fluid level is low, remove the fill plug and
add the specified fluid until it runs out of the hole
(Figure 54).
3. Install the fill plug and torque it to 20 to 27 N∙m
(15 to 20 ft-lb).
Changing the Transaxle
Fluid
Service Interval: Every 100 hours—Check the
transaxle for leaks.
Every 800 hours/Yearly (whichever comes
first)—Change the transaxle fluid.
Fluid Type: SAE 10W-30 (API service SJ or higher)
Fluid Capacity: 0.66 L (0.7 US qt)
1. Align a drain pan under the transaxle cover
(Figure 55).
(Figure 54).
1. Transaxle cover
2. Remove the bolts from the transaxle cover and
drain the fluid completely
Note:
3. Install the transaxle cover using the previously
removed bolts, and torque the bolts to 22 to 32
g217835
N∙m (16 to 24 ft-lb).
4. Remove the fill plug on the transaxle and fill the
transaxle with the specified fluid until it runs out
of the fill hole
5. Install the fill plug and torque it to 20 to 27 N∙m
(15 to 20 ft-lb).
44
Figure 55
2. Bolts
(Figure
Retain the transaxle cover and bolt.
(Figure 54).
g217834
55).