Checking The Tire Pressure; Checking The Torque Of The Wheel-Lug Nuts - Toro 30609 Operator's Manual

Checking the Tire Pressure

Service Interval: Before each use or daily
DANGER
Low tire pressure decreases machine side-hill
stability. This could cause a rollover, which
may result in personal injury or death.
Do not underinflate the tires.
The correct air pressure in the tires is 172 to 207 kPa
(25 to 30 psi).
Important:
Maintain the recommended pressure
in all tires to ensure a good quality of cut and
proper machine performance. Do not under-inflate
the tires.
Check the air pressure in all the tires before
operating the machine.
Figure 11
Checking the Torque of the
Wheel-Lug Nuts
Service Interval: After the first hour
After the first 10 hours
Every 200 hours
Torque the wheel-lug nuts to 115 to 136 N∙m (85 to 100
ft-lb) in the order shown in
g001055
WARNING
Failing to maintain proper torque of the
wheel-lug nuts could result in personal injury.
Torque the wheel-lug nuts to the proper
torque value.
25
Figure 12 and Figure
Figure 12
Front Wheels
Figure 13
Rear Wheels
13.
g033358
g033359