Specifications; Attachments/Accessories; Before Operation; Before Operation Safety - Toro 30609 Operator's Manual

Specifications

Note:
Specifications and design are subject to
change without notice.
Width of cut
Overall
Front mower deck
Wing mower deck
Front and one wing mower deck
Overall width
Mower decks down
Mower decks up (transports)
Overall length
Height
Height with ROPS
Ground clearance
Wheel tread (to center of tire)
Front
Rear
Wheel base
Net Weight

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
Operation
Note:
machine from the normal operating position.
335 cm (132 inches)

Before Operation

157 cm (62 inches)
107 cm (42 inches)

Before Operation Safety

246 cm (97 inches)
General Safety
345 cm (136 inches)
•
183 cm (72 inches)
342 cm (135 inches)
140 cm (55 inches)
217 cm (85.3 inches)
•
17 cm (6-1/2 inches)
•
114 cm (45 inches)
119 cm (47 inches)
141 cm (55-1/2
inches)
1907 kg (4205 lb)
•
•
•
22
Determine the left and right sides of the
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
Know how to stop the machine and engine quickly.
Check that all safety devices are attached and
functioning properly. This includes, but is not
limited to, operator-presence controls; safety
switches and shields; the rollover protection
system (ROPS); attachments; and brakes. Do
not operate the machine unless all safety devices
are in position and functioning as intended by the
manufacturer.
Always inspect the machine to ensure that the
blades, blade bolts, and cutting assembly are not
worn or damaged. Replace worn or damaged
blades and bolts in sets to preserve balance.
Inspect the area where you will use the machine
and remove all objects that the machine could
potentially throw.
Evaluate the terrain to determine the appropriate
equipment and any attachments or accessories
required to operate the machine properly and
safely.