Adjusting The Rollover Protection System (Rops) - Toro 30609 Operator's Manual

Adjusting the Rollover
Protection System (ROPS)
WARNING
To avoid injury or death from rollover: keep
the roll bar in the raised locked position and
use the seat belt.
Ensure that the seat is secured with the seat
latch.
WARNING
There is no rollover protection when the roll
bar is in the down position.
• Do not operate the machine on uneven
ground or on a hillside with the rollover
protection in the down position.
• Lower the roll bar only when absolutely
necessary.
• Do not wear the seat belt when the roll bar
is in the down position.
• Drive slowly and carefully.
• Raise the roll bar as soon as clearance
permits.
• Check carefully for overhead clearances
(i.e., branches, doorways, electrical wires)
before driving under any objects and do
not contact them.
Important:
Always use the seat belt when the
roll bar is in the raised and locked position. Do
not use the seat belt when the roll bar is in the
lowered position.
Lowering the ROPS
Important:
Lower the roll bar only when
absolutely necessary.
Important:
Ensure that the seat is secured with
the seat latch.
Raising the ROPS
26
Figure 14
Figure 15
g033621
g033136
g033137