Toro 30609 Operator's Manual page 17

g028454
1. Power-point port
Power-Point Port
The power-point port is used to power optional
electrical accessories
Adjusting the Seat
Seat-Adjustment Lever
Move the seat-adjustment lever on the side of the
seat outward, slide the seat to the desired position,
and release the lever to lock the seat into position
(Figure 6).
1. Weight gauge
2. Weight-adjustment lever
3. Seat-adjustment lever
1
2
Figure 5
2. Cruise-control switch
(Figure 5).
Figure 6
4. Seat-back adjustment
lever
5. Armrest-adjustment knob
(not shown; located under
arm rest)
Armrest-Adjustment Knob
Rotate the knob to adjust the armrest angle
Seat-Back-Adjustment Lever
Move the lever to adjust the seat-back angle
6).
Weight Gauge
The weight gauge indicates when the seat is adjusted
to the weight of the operator
g028454
height by positioning the suspension within the range
of the green region.
Weight-Adjustment Lever
Use this lever to adjust to the proper weight of the
operator (Figure
the air pressure and push down to decrease the air
pressure. The proper adjustment is correct when the
weight gauge is in the green region.
g008837
17
(Figure 6). Adjust the
6). Pull up the lever to increase
(Figure 6).
(Figure