Setup; Greasing The Machine; Replacing The Warning Decal; Checking The Tire Pressure - Toro 30609 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
Media and Additional Parts
Description
Operator's Manual
Engine owner's Manual
Parts Catalog
Operator training materials
Declaration of Conformity
Note:
Determine the left and right sides of the
machine from the normal operating position.
1

Greasing the Machine

No Parts Required
Procedure
Before operating the machine, grease it to ensure
proper lubricating characteristics; refer to
the Bearings and Bushings (page
Important:
Failure to properly grease the
machine will result in premature failure of critical
parts.
Description
No parts required
Warning decal
No parts required
No parts required
Greasing
51).
Qty.
–
1
–
–
Qty.
1 Review before operating machine
1 Use to reference engine information
1 Use to reference part numbers
1 Review before operating machine
1
2
Replacing the Warning
Decal
For CE Models Only
Parts needed for this procedure:
1 Warning decal
Procedure
On machines requiring European CE compliance,
replace the warning decal Part No. 117-2754 with the
warning decal Part No. 117-2766.
14
Use
Grease the machine.
Replace the warning decal.
Check the tire pressure.
Check the fluid levels.
Use