Hitachi Relion 670 Series Applications Manual page 405

1MRK506375-UEN Rev. N
Section 21
21.1 IED identifiers TERMINALID
21.1.1 Application
IED identifiers (TERMINALID) function allows the user to identify the individual IED in the system, not
only in the substation, but in a whole region or a country.
21.2 Product information PRODINF
21.2.1 Application
Product information contains unchangeable data that uniquely identifies the IED.
Product information data is visible on the local HMI under Main menu/Diagnostics/IED status/
Product identifiers and under Main menu/Diagnostics/IED Status/Identifiers:
Product information data is visible on the local HMI under Main menu/Diagnostics/IED status/
Product identifiers and under Main menu/Diagnostics/IED Status/Identifiers.
• ProductVer
• ProductDef
• FirmwareVer
• SerialNo
• OrderingNo
• ProductionDate
• IEDProdType
Figure 199:
This information is very helpful when interacting with Hitachi Energy product support (for example
during repair and maintenance).
21.2.2 Factory defined settings
The factory defined settings are very useful for identifying a specific version and very helpful in the
case of maintenance, repair, interchanging IEDs between different Substation Automation Systems
and upgrading. The factory made settings can not be changed by the customer. They can only be
viewed. The settings are found in the local HMI under Main menu/Diagnostics /IED status/Product
identifiers
The following identifiers are available:
• IEDProdType
•
• ProductDef
•
• FirmwareVer
Railway application RER670
Application manual
Basic IED functions
Use only characters A-Z, a-z and 0-9 in station, object and unit names.
IED summary
Describes the type of the IED. Example: REL670
Describes the release number from the production. Example: 2.1.0
© 2017 - 2023 Hitachi Energy. All rights reserved
Section 21
Basic IED functions
IP15060-1 v2
M15324-3 v7
GUID-F67243CA-2429-4118-BBFF-3D62BF55E080 v2
GUID-D78786E6-C34A-4E63-9D1E-0582C8F1F7E1 v11
M11789-39 v11
399