5.
Set "Refresh Settings" as follows. Set the same values to the local stations (station number 1 and station number 2).
[Navigation window] [Parameter] [Module Information] [RJ71GN11-SX] [Basic Settings] [Refresh Settings]
[Detailed Setting]
6.
Click the [Apply] button.
7.
Write the set parameters to the CPU modules on the local stations (station number 1 and station number 2). Then, reset
the CPU modules or power off and on the system.
[Online] [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
MELSEC iQ-R CC-Link IE TSN User's Manual (Application)
8 COMMUNICATION EXAMPLES
8.2 RJ71GN11-SX Communication Example
8
95