Chapter 5 System Configuration (Rj71Gn11-T2) - Mitsubishi Electric MELSEC iQ-R Series User Manual

5
SYSTEM CONFIGURATION (RJ71GN11-T2)
RJ71GN11-T2 is configured using Ethernet cables. ( Page 67 Ethernet Cables).
(4)
(3)
(1) RJ71GN11-T2
(2) Inverter device
(3) Remote I/O module
(4) Ethernet device (such as a vision sensor)
System configuration list
The following lists the system configurations.
Connection device
Modules on CC-Link IE TSN (CC-Link IE TSN Class B only), Ethernet devices
Modules on CC-Link IE TSN (mixture of CC-Link IE TSN Class B/A or Class A
only), Ethernet devices
Modules on CC-Link IE TSN, modules on CC-Link IE Field Network, Ethernet
devices
CC-Link IE TSN Communication Software, modules on CC-Link IE TSN
Modules on CC-Link IE TSN (protocol version 2.0/1.0 mixed), Ethernet
devices
Modules on CC-Link IE TSN (protocol version 1.0 only), Ethernet devices
Precautions
A dedicated TSN hub may be required depending on parameter settings or the network topology used to connect modules on
CC-Link IE TSN.
5 SYSTEM CONFIGURATION (RJ71GN11-T2)
30
(1)
(2)
Reference
Page 32 Structure with CC-Link IE TSN Class B Devices Only
Page 43 Structure with CC-Link IE TSN Class B/A Devices
Page 60 Structure of the CC-Link IE TSN and CC-Link IE Field Network
Page 61 Structure When CC-Link IE TSN Communication Software Is Used
Page 105 System Configuration with CC-Link IE TSN Class B/A Devices
(Protocol Version 2.0/1.0) (RJ71GN11-T2)
Page 109 System Configuration with CC-Link IE TSN Class B/A Devices
(Protocol Version 1.0 Only) (RJ71GN11-T2)