Cms Error Values: Kinds Of Errors - Nokia 6090 Command Manual

+CMS ERROR Values: Kinds of Errors

Nokia 6090 AT Command Set
AT Command
+CMGD=
+CMGC=
1 phone security code required to execute the AT command
2 ME does not have a SIM connected to it
3
SIM PIN required to execute the AT command
4
SIM PUK required to execute the AT command
5 SMS interface is reserved by some other application
6 general memory error; e.g. problems in SIM database
communication
7 message to be sent to network does not contain SMSC address
and SMSC address cannot be found from TA or ME
8
memory location does not exist
9 RP layer cause value from network
10 TP layer cause value from network
11
PDU mode is enabled: length of the given PDU is not
equivalent with the given <length>, or ME/TA detects that PDU
is of invalid format
12 text mode is enabled: too long message is tried to be
sent/stored, or +CSMP does not contain valid SMS-SUBMIT (in
case of +CMGS=), or ME/TA detects that PDU is of invalid
format
13 SMS memory is full
14 <index> given in +CMSS does not contain SMS-SUBMIT or
SMS-COMMAND, or <index> given in +CMSS contains SMS-
COMMAND and <da> is given
15 no +CNMA acknowledgement expected
16 no network service
Copyright © 2001. Nokia Mobile Phones. All rights reserved.
+CMS <err> Value Kinds of Errors
301 5
310 2
311 3
312 1
316 4
320 6
321 8
0-127 9
128-255 10
301 5
304 11
305 12
310 2
311 3
312 1
316 4
330 7
331 16
76