Ipr Fixed Dte Rate; Vts Dtmf Generation; Ws46 Select Wireless Network - Nokia 6090 Command Manual

+IPR Fixed DTE Rate

+VTS DTMF Generation

+WS46 Select Wireless Network

Nokia 6090 AT Command Set
This command specifies the data rate at which the Nokia 6090 will accept
commands. Nokia 6090 does not support autobauding. Note that reset commands Z
and &F do not change this setting.
Syntax:
AT+IPR=<rate>
AT+IPR?
AT+IPR=?
Values for <rate>:
9600
19200
38400
57600
115200
This command is used to send DTMFs. Also the dialling command can be used to
send DTMFs (see command D Dial, page 58). (PN-3131)
Syntax:
AT+VTS=[<dtmf>[,<dtmf>,...]]
AT+VTS=?
Currently there are no values for DCS1800 or PCS1900 but the option '12' could also
be used for them. (GSM 07.07, TIA-678)
Syntax:
AT+WS46=[12]
AT+WS46?
AT+WS46=?
Set DTE rate. Default is 19200.
Query current setting.
Response is +IPR: <rate>.
Show valid range of rate.
Response is +IPR:(list of supported
<rate>'s).
19200 bps is the default value. Please
note that the Nokia 6090 will always boot
using this value.
Show supported values.
Response is ( ),( ),( )
Select wireless network.
Query current setting. Response is 12.
Show options. Response is (12).
57