Csas Save Settings; Csca Service Centre Address - Nokia 6090 Command Manual

+CSAS Save Settings

+CSCA Service Centre Address

Nokia 6090 AT Command Set
This command saves active message service settings to SIM. All settings specified in
commands Service Centre Address +CSCA and Set Message Parameters +CSMP
are saved. (GSM 07.05)
Values stored are those that are available in SIM database (GSM 11.11. Protocol id
(<pid>), data coding scheme (<dcs>) and validity period (<vp>) are not stored if
+CSMP parameter <fo> does not indicate SMS-SUBMIT (i.e. bits 1-0 are not '01'). In
addition, validity period is not stored if <fo> does not indicate relative validity period
format (i.e. bits 4-3 are not '10').
Syntax:
AT+CSAS=1
AT+CSAS=?
This command updates the short message service centre (SMSC) address, through
which mobile originated short messages are transmitted (local TA SMSC address).
SMSC address may also change when +CRES is actioned. If this value is not set (i.e.
not restored from ME or set with this command during the current session) before
using +CMGS, +CMGW (in case of SMS-SUBMIT or SMS-COMMAND) or +CMGC
command, it must be automatically read from SIM/ME. (GSM 07.05)
Syntax:
AT+CSCA=<sca>[,<tosca>]
AT+CSCA?
AT+CSCA=?
Parameters:
<sca>
<tosca>
Example:
AT+CSCA="+49000038383",145
This set the international (145) number +49000038383 as SMSC. The settings on the
SIM card are not changed.
Save settings.
Display the supported profile numbers for
reading and writing of settings.
Response is +CSAS: (1).
Set service centre address.
Default setting is "",129.
Current setting query.
Response is +CSCA: <sca>,<tosca>.
OK
service centre address
type of address, 129 for normal and 145
for international access (number contains
'+' character)
45