+CMEC ME Control Mode
+CMEE Report Mobile Equipment Error
+CMER ME Event Reporting
Nokia 6090 AT Command Set
Selects whether ME or TE (or both) are allowed to update ME physical UI
components. Display writing and Indicator updating are not supported. (GSM 07.07.)
Syntax:
AT+CMEC=[<keyp>[,<disp> [,<ind>] ]] Default option is 0 [,0] [,0].
AT+CMEC?
AT+CMEC=?
Parameters:
<keyp>:
0
2
<disp>:
0
<ind>:
0
This command controls the presentation of extended error information result code.
See also result code +CME ERROR. (07.07)
Syntax:
AT+CMEE=[<n>]
AT+CMEE?
AT+CMEE=?
Parameters:
<n>:
0
1
2
Enables/disables the presentation of unsolicited keypad and indicator result codes.
Important note: This feature is avaible in 5.300 SW or later.
Syntax:
AT+CMER=[<mode>[,<keyp>[,<disp>
[,<ind>[,<bfr>]]]]]
AT+CMER?
AT+CMER=?
Parameters:
Query current setting.
Response is +CMEC: <keyp>, 0, 0
Show supported values.
Response is +CMEC: (list of supported
<keyp>'s), (0), (0)
ME can be operated only through its
keypad
ME can be operated from both ME keypad
and TE
only ME can write to its display
only ME can set the status of its indicators
(command +CIND can only be used to
read the indicators); see 20
Default option is 0.
+CMEE: <n>
Response is +CMEE: (list of supported
<n>'s).
disable +CME ERROR: <err> result code
and use ERROR instead
enable +CME ERROR: <err> result code
and use numeric <err> values
enable +CME ERROR: <err> result code
and use verbose <err> values
Default option is [2],0,[0],0,[0].
+CMER:
<mode>,<keyp>,<disp>,<ind>,<bfr>
Response is +CMER: (list of supported
<mode>'s), (list of supported <keyp>'s),
(list of supported <disp>'s), (list of
supported <ind>'s), (list of supported
<bfr>'s).
26