Clcc List Current Calls - Nokia 6090 Command Manual

+CLCC List Current Calls

Nokia 6090 AT Command Set
Examples:
AT+CKPD="D"
Simulation of keypress down as if was done by the human user of the phone. For
example it can be used to change the volume during a call.
AT+CKPD="\5B911"
This keypress combination causes the Nokia 6090 to go to Menu 9-1-1.
AT+CKPD="vV\56\76"
This keypress combination causes the Nokia 6090 to activate the down arrow
keypress four times.
AT+CKPD="m9221"
Change the currently selected ringing tone to "Wiliam Tell" ringing tone.
AT+CKPD="m915"
Mute the ringing tone.
AT+CKPD="c",10
Makes the Nokia 6090 go back to the idle display state from any sub-menu.
This command simulates the "c" keypress with a duration of one second.
Returns list of currently available calls in ME. (GSM 07.07)
Syntax:
AT+CLCC
AT+CLCC=?
Parameters:
<idx>: integer type; call identification number as described in GSM 02.30; this
number can be used in +CHLD command operations
<dir>:
0
1
<stat> (state of call):
0
1
2
3
4
5
<mode> (bearer/teleservice):
0
1
2
3
4
5
6
7
8
9
<mpty>:
0
1
Response is [+CLCC: <id1>, <dir>,
<stat>, <mode>, <mpty>[,,,<alpha>]
[<CR><LF>+CLCC: <id2>, <dir>, <stat>,
<mode>, <mpty> [,,,<alpha>] [...]]]
OK
mobile originated (MO) call
mobile terminated (MT) call
active
held
dialling (MO call)
alerting (MO call)
incoming (MT call)
waiting (MT call)
voice
data
fax
voice followed by data, voice mode
alternating voice/data, voice mode
alternating voice/fax, voice mode
voice followed by data, data mode
alternating voice/data, data mode
alternating voice/fax, fax mode
unknown
call is not one of multiparty (conference)
call parties
call is one of multiparty (conference) call
22