Ceer Extended Error Report; Cgmi Request Me Manufacturer Identification - Nokia 6090 Command Manual

At command set
Hide thumbs Also See for 6090:
Table of Contents

Advertisement

+CEER Extended Error Report

+CGMI Request ME Manufacturer Identification

Nokia 6090 AT Command Set
<number>: string type phone number of calling address in format specified by
<type>
<type>: type of address octet in integer format (GSM 04.08)
<alpha>: optional string type alphanumeric representation of <number>
corresponding to the entry found in phonebook; used character set should be the one
selected with command Select TE Character Set +CSCS
Examples:
AT+CCWA=1,2
Queries the status of the "Call waiting service"
AT+CCWA=1,1,4
Set call waiting for fax only.
AT+CCWA=0,0,2
Disables call waiting for fax only.
AT+CCWA=1,1
Sets call waiting for voice, fax and data.
AT+CCWA=0,0
Disables the "Call waiting service"
All of the above combinations are very network dependent. Ask your network
operator if you have the rights to set forwardings that wouldn't work for you.
If call waiting is active, you are doing a call and you are called you might see:
+CCWA: "",145,1
Alternatively, you may see the callers number:.
+CCWA: "+499501231234",145,1
Now you could change active calls with the +CHLD command.
This command causes the Nokia 6090 to return one or more lines of information text,
which should offer the user an extended report of the reason for failure in the last
unsuccessful call setup (originating or answering). Typically, the text will consist of a
single line containing the failure information given by the GSM network in a textual
format. <report> is the textual representation of network cause value as listed in
GSM 04.08 annex H. (GSM 07.07)
Syntax:
AT+CEER
AT+CEER=?
<report>: the total number of characters, including line terminators, in the information
text do not exceed 2041 characters. Text does not contain the sequence 0<CR> or
OK<CR>.
This command displays the ME manufacturer identification. (GSM 07.07.)
Syntax:
AT+CGMI
AT+CGMI=?
Display error report.
Response is +CEER: <report>
OK
Display manufacturer identification.
Response is Nokia Mobile Phones
OK
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents