Csms Select Message Service; Csns Single Numbering Scheme; Csq Signal Quality - Nokia 6090 Command Manual

+CSMS Select Message Service

+CSNS Single Numbering Scheme

+CSQ Signal Quality

Nokia 6090 AT Command Set
This commands selects the messaging service and returns the type of messages
supported. Supported service is specified by GSM 03.40 and 03.41 (service value 0).
Main difference between 0 and 1 is that when =1 +CNMA acknowledgement is
required to most MT short messages routed directly TE. (GSM 07.05)
Syntax:
AT+CSMS=<service>
AT+CSMS?
AT+CSMS=?
Parameters:
<mt>, <mo>, <bm>:
0 type not supported
1 type supported
<mt>: mobile terminated messages supported (value 1) or not (value 0)
<mo>: mobile originated messages supported (value 1) or not (value 0)
<bm>: broadcast type messages supported (value 1) or not (value 0)
This command is used to select the bearer service to be used when a call without
bearer service capability element is received. The command must be given before
the call comes. Parameter values set with the command +CBST are used when
<mode> equals to a data service. (GSM 07.07)
Syntax:
AT+CSNS=[<mode>]
AT+CSNS?
AT+CSNS=?
Values for <mode>:
0
2
4
Returns signal strength as calculated by ME. Bit error rate reporting not supported.
(GSM 07.07)
Syntax:
AT+CSQ
AT+CSQ=?
Parameters:
<rssi>:
0
1
2...30
31
99
Select message service.
Response is +CSMS: 1,1,1
Default setting is 0.
Query current setting.
Response is +CSMS:
<service>,<mt>,<mo>,<bm>
Show supported services.
Response is +CSMS: (0,1)
Set single numbering scheme mode. The
Default option is 0.
Query current setting.
Response is +CSNS: <mode>
Show supported modes.
Response is +CSNS: (list of supported
<mode>'s).
voice (default)
fax (teleservice 62)
data
Response is +CSQ: <rssi>, 99
Show supported values.
Response is +CSQ: (list of supported
<rssi>'s), (99)
-113 dBm or less
-111 dBm
-109... -53 dBm
-51 dBm or greater
not known or not detectable
48