Clck Facility Lock - Nokia 6090 Command Manual

+CLCK Facility Lock

Nokia 6090 AT Command Set
Enables/disables or queries the state of SIM/ME security features (PIN/security code
query or fixed dialling feature) or call barring supplementary services. <fac> values
"AB", "AG" and "AC" are only applicable for <mode>=0. Only security code levels
'phone' and 'none' can be handled with this command. If 'memory' level is set and
status is queried (+CLCK="PS",2), AT interface indicates 'not active' (+CLCK: 0).
When SS status request response from network indicates that SS is active for
specific data bearer services (e.g. 'circuit async'), AT interface indicates only 'data'
(<class>=2) ('not active' case is displayed only when SS is not active to any service;
i.e. +CLCK: 0,7). (GSM 07.07)
Syntax:
AT+CLCK=<fac>,
<mode>[, <passwd>
[,<class>]]
AT+CLCK=?
Parameters:
<fac>:
"PS"
"SC"
"AO"
"OI"
"OX"
"AI"
"IR"
"AB"
"AG"
"AC"
"FD"
<mode>:
0
1
2
<status>:
0
1
<passwd>: string type; shall be the same as password specified for the facility from
the ME user interface or with command Change Password +CPWD
When <mode>=2: the response is
+CLCK: <status>[,<class1>
[<CR><LF>+CLCK: <status>,<class2>
[...]]].
Default option is [,,,7].
Show supported values.
Response is +CLCK:(list of supported
<fac>'s).
PH-SIM (lock PHone to SIM card) (ME
asks password when other than current
SIM card inserted)
SIM (lock SIM card) (SIM asks password
in ME power-up and when this lock
command issued)
BAOC (Barr All Outgoing Calls)
(GSM 02.88, clause 1)
BOIC (Barr Outgoing International Calls)
(GSM 02.88, clause 1)
BOIC-exHC (Barr Outgoing International
Calls except to Home Country)
(GSM 02.88, clause 1)
BAIC (Barr All Incoming Calls)
(GSM 02.88, clause 2)
BIC-Roam (Barr Incoming Calls when
Roaming outside the home country)
(GSM 02.88, clause 2)
All Barring services (GSM 02.30)
All outGoing barring services (GSM 02.30)
All inComing barring services
(GSM 02.30)
SIM fixed dialling memory feature (if PIN2
authentication has not been done during
the current session, PIN2 is required as
<passwd>)
unlock
lock
query status
not active
active
24