Table of Contents
Advertisement
Sub Menu
Power Save
Power Indicator/Button LED Settings
Power Indicator
Brightness
Display Button LED
Button Name Lighting
Time
120 min., 60 min.,
Automatically turns off video display's power supply when there is no
30 min., Off
video signal input.
The message [No Signal, Turn off power by Power Save function.]
is displayed when there is no signal input for the selected time.
Approximately 5 minutes later, the message will read [No Signal, Turn off
power.] and the power will be turned off. The power is not automatically
turned off when this function is set to [Off].
Off
Adjusts the brightness of the power indicator on the main unit. The greater
1 to 5 (3)
the number, the higher the brightness.
On, Off
Sets the F buttons and the lamp on the face.
Always, 60 sec.,
Sets the time (sec) until the lamp on the face goes out, if no operation is
30 sec., 10 sec., 5 sec.
performed.
[Always]: The lamp on the face is always lit.
Setting Options (Bold: factory default)
OSD Menu
63
Advertisement
Table of Contents
