Canon DP-V1830 Operation Manual page 57

Sub Menu
Range - HDR
1
Range Check
Enable
Over Range
SMPTE ST 2084
(PQ)
Hybrid Log-Gamma 100 to 1000 (1000)
Other
2020 Outside of Gamut
1
View
Enable
Color Gamut
Range
Sets the tint color range.
When [False Color 1]
Automatic
Automatic (Over Range) [Automatic]: Sets the upper limit automatically in accordance with the
Manual
When [False Color 2]
Automatic When [Manual] or [Automatic (Over Range)] is selected, sets the size of
Automatic (Over Range) the area to be colored.
Manual
Displays video in monochrome, with the areas where the set range is exceeded are shown tinted.
Customizes Range Check and sets it to Range Check 1, 2.
Range Check 1 Switches the Range Check display mode On, Off.
Range Check 2
Off
Automatic, Manual Displays video in monochrome, with the areas where the set range is
exceeded are shown tinted.
[Automatic]: Outside the range of the [Color Range] settings is tinted.
[Manual]: Only areas that exceed the range set at [SMPTE ST 2084 (PQ)]
100 to 10000 (1000) When [Over Range] [Manual]
Sets the tint color range. (100 to 1000: 10 increments,
1000 to 4000: 100 increments, 4000 to 10000: 1000 increments)
When [Over Range] [Manual]
Sets the tint color range. (10 increments)
512 to 1023 (940) When [Over Range] [Manual]
Sets the tint color range. (1 increments)
When [Picture Mode] or [Color Gamut] [ITU-R BT.2020]
Displays video in monochrome, with the areas where the color gamut exceeds the selected color
gamut shown in red.
On, Off Switches between On and Off for [2020 Outside of Gamut View].
ITU-R BT.709 Sets the [Color Gamut] to be set as out of color gamut.
Native
0 to 512 (0) Sets the range when tinting dark areas. (1 increments)
0: Tints all dark areas.
512: Dark areas at the set values or less are not tinted.
Setting Options (Bold: factory default)
[Gamma/EOTF] settings.
When [Gamma/EOTF] [SMPTE ST 2084 (PQ)] or [Hybrid Log-
Gamma], outside the range of the [Color Range] and [HDR Range]
settings is tinted.
or [Hybrid Log-Gamma] are tinted.
OSD Menu
57