Table of Contents
Advertisement
OSD Menu
Sub Menu
Channel Order
48
Size
Position
Peak Hold
Reference Level
Brightness
1
Wave Form Monitor
Enable
Select Signal
Normal
Sets the order of channels.
Grouping
[Normal]: Odd-numbered channels are shown on the left side, even-
[Grouping]: Channels are shown in sequence on the left and right sides "([1,
Large
Sets the size of the display.
Small
• In [Single Input Dual View] display when [Channel Number (SDI)] is set to [16CH],
this setting is invalid.
Normal
Selects the display position.
Left
[Normal]: Displays the audio level meter on both ends.
[Left]: Indication on the right side is displayed toward the center of the
On, Off
One second of audio signal at the peak is kept.
-40 to 0 (-20)
Sets the reference level.
Normal
Sets brightness for the audio level meter.
Low
Half
Configures various settings for the wave form monitor. On the wave form monitor, the horizontal axis
shows the horizontal resolution of the video and the vertical line shows the signal level. To the right of
the wave form monitor, [Color Range] and [HDR Range] information (vertical line) is displayed.
Signal level
On, Off
Switches the wave form monitor On, Off.
Y, Cb, Cr, R, G, B
Sets the waveform to be displayed.
• When one of [R], [G] or [B] is selected, the non-constant value is displayed even
if [2020 Constant Luminance] is set to [Constant].
Setting Options (Bold: factory default)
numbered channels on the right side "([1, 3, 5, 7] etc.) on the left, ([2, 4,
6, 8] etc.) on the right".
2, 3, 4] etc.) on the left, ([5, 6, 7, 8] etc.) on the right".
screen. This prevents the indication from overlapping with the banner.
Horizontal resolution of video
Advertisement
Table of Contents
