Table of Contents
Advertisement
OSD Menu
Network/IMD Settings
Sub Menu
LAN
60
Configure an IP
Address
Display
Subnet Mask
In Monitor Display
Control
Position
Manual Display Type
Manual String
Configures video display's network settings.
• Cannot be set when [Power on Setting] is [User 1] to [User 3].
Automatic
[Automatic]: Configures an IP address automatically with DHCP/Auto IP.
Manual
[Manual]: Configure an IP address and subnet mask manually.
192.168.0.1
255.255.255.0
The video display supports Television Systems Ltd.'s "TSL UMD Protocol Ver. 5.0". You can operate
the video display using an external device connected to the LAN terminal and display characters and
tally lights on the screen. You can input any characters you like directly from this video display. (
TSL Ver. 5.00
Sets whether or not to receive the control signal from the connected
Manual
device.
Off
[Manual]: Select to input the characters on this video display. Does not
Top
This sets whether the characters and tally lights will be displayed at the
Bottom
top or the bottom.
Automatic
[Automatic]: Changes display in accordance with the Input Configuration.
Single
[Single]: Single-screen display.
Dual A,B, Dual C,D
[Dual A,B], [Dual C,D]: Dual-screen display.
Quad A,B,C,D
[Quad A,B,C,D]: Quadruple-screen display.
• When [Function Settings] [Signal Monitoring] [Control] is set to [On] then
[Manual Display Type] is fixed to [Automatic].
(Single)
When [Control] [Manual]
(Dual/Quad A)
Sets the characters to display for the selected [Manual String]. You can
(Dual/Quad B)
input up to 16 alphanumeric characters.
(Dual/Quad C)
(Dual/Quad D)
(Single Dual L)
(Single Dual R)
Setting Options (Bold: factory default)
receive a control signal from the connected device.
18)
Advertisement
Table of Contents
