Table of Contents
Advertisement
Sub Menu
Automatic Adjustment
(VARICAM)
User LUT
Anamorphic
Camera Information
1
T he information display functions that can be displayed vary depending on the video display's settings or the input signal status.
When [Frame Hold] is [On]
During execution of [Playback File] under [Screen Capture]
When [Test Pattern] is displayed
When [Multi View (Quad)] is displayed
When [Multi View (Dual)] is displayed
When [Single Input Dual View] is displayed
When [Picture Function Settings]
to [On], [Single Input Dual View] is set to [Off] and also the resolution is
4096x2160 or 3840x2160
While images other than resolution 4096x2160 / 3840x2160 / 2048x1080
/ 1920x1080 are displayed, or when there is no signal or the input signal is
unsupported
When [Picture Mode] [User 6] to [User 7], [Input Configuration] [12-3G/HD-SDI]
Sets whether or not to link to the camera's image quality setting.
On, Off
Refer to the Setting Values Correspondence Table. (
V-Log to V-709
When [Automatic Adjustment (VARICAM)] [On]
3D-LUT 1-8
Sets the color gamut and gamma/EOTF shown in the display.
On, Off
When a Canon camera is connected, displays in accordance with the
settings when anamorphic lens display settings are included in the camera
metadata.
Automatic
Sets conditions to display camera information.
On
Off
[Automatic]: Camera information is displayed for 4 seconds when the
[On]: Camera information is always displayed.
[Off]: Camera information is not displayed.
• Not displayed when Multi View (Quad) / Multi View (Dual).
[Compare View]
[Enable] is set
Setting Options (Bold: factory default)
information has changed.
Time
Audio Level
Code
Meter
—
—
—
—
—
—
—
—
—
—
=
=
=
=
=
=
OSD Menu
55)
Wave Form
Vector
Pixel Value
Monitor
Scope
Check
=
=
=
—
—
—
=
=
=
—
—
—
—
—
—
—
=
=
—
—
—
—
—
—
=: Can view —: Cannot view
53
Advertisement
Table of Contents
