Table of Contents
Advertisement
Sub Menu
Detail Settings
CDL Export
CDL Preset
CDL 1 to CDL 8
All
File Type
CCC, CDL
Execute
CDL Import
Filename
CDL Preset
CDL 1 to CDL 8
Execute
CDL Preset Name
Anchor CDL
Reset CDL
l When [User LUT 1-8] is selected
Select a preset of the 3D-LUT.
3D-LUT
Selects the User LUT (3D-LUT) to apply and imports an external LUT (3D-LUT).
3D-LUT
3D-LUT 1 to 3D-LUT 8
Off
LUT Import
LUT Name
LUT Delete
Color Range
Automatic, Manual
Setting Options (Bold: factory default)
Exports CDL parameters.
Imports CDL parameters.
You can change the name of [CDL 1-8] within 16 characters including
alphabetical characters, numbers, and symbols.
You can temporarily save parameters for [Power], [Saturation], [Offset],
and [Slope] and recover the values. (anchor point setting)
Resets CDL parameters.
Select the 3D-LUT (preset) saved in one of [User LUT 1-8].
Same as [Detail Settings] [LUT Import], [LUT Name], [LUT Delete]
(
26)
• Cannot be set when [3D-LUT] [Off].
Sets the method of color range conversion performed before and after
User LUT processing (input/output).
[Automatic]: The color range is automatically converted before and after
User LUT processing (input/output).
-
When [Color Range] [Limited] (
Full]. [Output] is set to [Full to Limited].
-
When [Color Range] [Full] (
* [SDI Full (4-1019)] is included.
[Manual]: Sets [Input] or [Output].
OSD Menu
23): [Input] is set to [Limited to
23)*: [Input] and [Output] are set to [Off].
25
Advertisement
Table of Contents
