Table of Contents
Advertisement
OSD Menu
Sub Menu
2
Monochrome
2
Blue Only
58
2
Red Off
2
Green Off
2
Blue Off
1
Compare View
Enable
Type
HDR/SDR Convert
Method
On, Off
Video is displayed in monochrome.
On, Off
Cuts red and green signals, and displays only blue signals in monochrome.
• [Blue Only] cannot be set when [CDL/User LUT] is a setting other than [CDL 1-8]
or [Off].
On, Off
Video is displayed with red signals cut.
On, Off
Video is displayed with green signals cut.
On, Off
Video is displayed with blue signals cut.
Images having different image quality settings are displayed on the left and right screens for
comparison. (When [Picture Mode] for left and right screens is the same)
• When a signal with a resolution of 2K or smaller is displayed on a single screen, changes to [Single Input Dual
View].
• This cannot be set when [2020 Constant Luminance] is set to [Constant] and the [Format] signal method is
ICtCp or XYZ.
On, Off
Sets Comparison mode On or Off.
Automatic
Sets the type of the image to compare.
HDR/SDR
CDL/User LUT
[Automatic]: [HDR/SDR] when [Adjustment]
[HDR/SDR]: HDR and SDR images are displayed.
[CDL/User LUT]: The image on which [CDL] or [User LUT] is applied is
• Not settable in the following cases:
-
-
2020 HDR to 709 SDR
When [Type] is set to [HDR/SDR] or [Automatic ([HDR/SDR])]
2020 HDR to 2020 SDR
Sets the display method of the screen set to SDR.
User LUT 1-User LUT 8
Off
[2020 HDR to 709 SDR], [2020 HDR to 2020 SDR]: Setting differs
[SMPTE ST 2084 (PQ)]: The [User LUT] corresponding to each setting
[Hybrid Log-Gamma]: The [User LUT] corresponding to each setting is
[Canon Log(HDR)], [Canon Log 2(HDR)], [Canon Log 3(HDR)]:
[S-Log2 (HDR)], [S-Log3 (HDR)]: [HDR Range] setting [100] is set.
[User LUT 1-8]: The specified [User LUT] is applied. After applying [User
[Off]: Only brightness is lowered.
Setting Options (Bold: factory default)
otherwise set at [CDL/User LUT].
displayed only in the left screen.
When [Color Gamut] is set to [Cinema Gamut to XXX] or [S-GamutXXX]
When [Gamma/EOTF] is set to [Canon Log], [Canon Log 2] or [Canon Log 3]
according to the [Gamma/EOTF] settings.
is applied.
applied.
[Canon Log], [Canon Log 2] or [Canon Log 3] is applied.
LUT] the adjustment inside the display fixes [Color Gamut] at [ITU-R
BT.709] and [Gamma/EOTF] at [2.4].
[CDL/User LUT] is [Off],
Advertisement
Table of Contents
