Table of Contents
Advertisement
Sub Menu
Color Range
Output Transform
Output Transform Surround Dim Surround
Automatic
Sets the quantization range.
Full
SDI Full (4-1019)
[Automatic]: Sets the range based on signal information automatically.
Limited
• Setting is disabled when [ACESproxy (ver. 1.0.1)] is selected for [Picture Mode].
• Operations when [Automatic] is selected are described below.
- It is set in accordance with the settings if Color Range settings are included in
- When HDMI is selected, [Full] or [Limited] is set automatically depending on
- When SDI is selected, the setting is configured according to the settings for
• Operations when [Format] is set to [ICtCp] are described below.
- When [Color Range] is set to other than [Full], [Wave Form Monitor] will display
ITU-R BT.709
When [Picture Mode] [ACESproxy (ver. 1.0.1)]
ITU-R BT.2020
DCI-P3
[ITU-R BT.709], [ITU-R BT.2020], [DCI-P3]: ACESproxy is converted into
When [Picture Mode] [ACESproxy (ver. 1.0.1)]
Dark Surround
[Dim Surround]: Enables Dim Surround process specified by ACESproxy.
[Dark Surround]: Enables Dark Surround process specified by ACESproxy.
Setting Options (Bold: factory default)
the camera metadata. When there is [Full Range] metadata in Payload when
SDI is selected, it will be set to [SDI Full].
HDMI signal information.
[Picture Mode], [Color Gamut], and [Gamma/EOTF] (
only a signal set with [Color Range].
respective mode.
OSD Menu
23
30).
Advertisement
Table of Contents
