Table of Contents
Advertisement
Sub Menu
Automatic
Scale
IRE
SMPTE ST 2084 (PQ)
Hybrid Log-Gamma
Canon Log
Canon Log 2
Canon Log 3
S-Log2
S-Log3
ARRI (Rec2100-PQ-
1K-100)
ARRI (Rec2100-HLG-
1K-200)
Reference Line
4 to 1023
Reference Level
Automatic
Manual
Reference Level
468 to 1023
High
Reference Level
0 to 468
Low
Color
Sets the signals to be displayed and the color of signals exceeding the reference level.
Y
White
Red
Cb
Green
Cr
Blue
Yellow
R
Cyan
G
Magenta
B
Reference Level
High
Reference Level
Low
Position
Bottom Left
Bottom Right
Size
Large, Middle, Small
Setting Options (Bold: factory default)
Sets the scale of the wave form monitor.
[Automatic]: Sets in accordance with the [Gamma/EOTF] and [Color
Range] settings.
• When [SMPTE ST 2084 (PQ)], [Canon Log], [Canon Log 2], or [Canon Log 3] is
set (including [Automatic]):
When [Gamma/EOTF] [SMPTE ST 2084 (PQ)], the item is displayed in
accordance with the [Color Range] settings ([SDI Full (4-1019)] is set to [Full]).
A guide is displayed at the specified position. [Reference Line] is not
displayed when [1023] is selected.
Sets the range of the reference level. Tints the outside of the range of the
reference level.
In the case of [Gamma/EOTF] corresponding to the HDR range, parts that
exceed the HDR range are tinted.
When [Color Range] [Limited], outside the limited range is tinted.
[Automatic]: Sets in accordance with the [Gamma/EOTF] and [Color
Range] settings.
Sets the reference display level (high). [Reference Level High] is not
displayed when [1023] is selected.
Sets the reference display level (low). [Reference Level Low] is not
displayed when [0] is selected.
[Y], [Cb], [Cr], [R], [G], [B]: Selects the color of the selected signal.
Default value of each signal is shown below.
Y (White), Cb (White), Cr (White), R (Red), G (Green), B (Blue)
[Reference Level High], [Reference Level Low]: Selects the color of the
signal of the selected reference level.
Default value of each reference level is shown below.
Reference Level High (Magenta), Reference Level Low (Cyan)
Selects the display position.
• This setting becomes invalid in the [Multi View (Dual)] display.
Sets the size of the display.
OSD Menu
49
Advertisement
Table of Contents
