Table of Contents
Advertisement
OSD Menu
Channel Settings
This menu is used for input related settings. Select the [Select Channel] and choose a channel number from CH1 to
CH20. Finally define the parameter of each of the [Channel Settings].
"Supported Signal Format" (
34
Sub Menu
Select Channel
Input Configuration
Select Input Signal
Image Division
69)
CH1 to CH20
Display the channel number. In addition, you can assign each content of
[Channel Settings] to each channel (
• It may take 3 seconds when switching channels.
12-3G/HD-SDI
Select the input. Factory default depend on the channel (
HDMI
— (Not set)
Automatic
Sets the signal display method.
Quad Input
Dual Input A,B
[Automatic]: The display method is automatically determined to match the
Dual Input C,D
Single Input A
[Quad Input]: Four input signals (Input A to Input D terminals) are
Single Input B
Single Input C
[Dual Input A,B]: Two input signals (Input A terminal and Input B terminal)
Single Input D
[Dual Input C,D]: Two input signals (Input C terminal and Input D terminal)
[Single Input A], [Single Input B], [Single Input C], [Single Input D]: One
• Settings that can be set differ according to the input signal.
- [HDMI]: This is fixed to [Automatic].
When [Input Configuration] [12-3G/HD-SDI]
Sets the display method when using either [Quad Input] or [Dual Input]. Two division methods
"Square Division" and "2 Sample Interleave" are supported for 4K video signals.
Automatic
[Automatic]: Automatically determined based on payload and displayed.
[Square Division]: Displays a signal transmitted over four inputs as a single
[Select Input Signal]
When [Quad Input]
[2 Sample Interleave]: Displays a signal transmitted divided into a 2K/HD
Square Division
[Multi View (Quad)]: Each of the images from the four inputs are shown in
2 Sample Interleave
[Multi View (Dual)]: Each of the images (Inputs A/B or Inputs C/D) from the
[Select Input Signal]
When [Quad Input]
Multi View (Quad)
[Select Input Signal]
When [Dual Input]
Multi View (Dual)
Select Input Signal: Q uad Input, Image Division: Square Division
• When using [Multi View (Quad)], the left and right parts of 2048x1080 images will
be trimmed to display an area of 1920x1080.
• For 2048x1080 images when using [Multi View (Dual)], the images are displayed
in reduced size when [Screen Scaling] is set to [Automatic]. The left and right
parts of images will be trimmed for display when anything other than [Automatic]
is selected.
Setting Options
input signal.
displayed.
are displayed.
are displayed.
input signal (any of Input A to Input D) is displayed.
image.
signal as a single image.
four screens.
two inputs are shown in two screens.
14).
15).
Advertisement
Table of Contents
