Huawei FusionModule1000A20 Maintenance Manual page 99

FusionModule1000A20 Prefabricated All-in-One
Data Center
Maintenance Guide
Procedure
Step 1 Open the door of the IC card reader box.
Step 2 Remove the two screws at the bottom of the IC card reader, and remove the front
cover.
Figure 6-16 Removing the front cover
Step 3 Remove the two screws that secure the IC card reader body.
Figure 6-17 Removing screws
Step 4 Remove interconnection terminals from the IC card reader, and remove the IC card
reader body.
Step 5 Remove the two screws from the bottom of the new IC card reader, and remove
the front cover.
Step 6 Reconnect the interconnection terminals, and close the door of the IC card reader
box.
Step 7 Check that the new IC card reader is working properly.
Issue 03 (2022-12-15) Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Parts Replacement
92