Huawei FusionModule1000A20 Maintenance Manual page 47

FusionModule1000A20 Prefabricated All-in-One
Data Center
Maintenance Guide
Check Item
(Optional) PAD
Exit button
Issue 03 (2022-12-15)
Description
RF_Z indicator
Appearance
Function
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Routine Maintenance
Criteria Troubleshooting
On: There are no For details, see
network the ECC800
parameters. A documents.
network is waiting
to be created.
Blinking slowly: A
network is set up,
and node access
is not allowed
(the indicator
blinks at 0.5 Hz,
on for 1s and
then off for 1s).
Blinking at super
short intervals: A
network is set up,
and node access
is allowed (the
indicator blinks at
10 Hz, on for
0.05s and then off
for 0.05s).
Blinking at super
short intervals
intermittently:
The device is
searching for a
network (the
indicator blinks at
2 Hz, on for 0.5s
and then off for
0.5s).
The exterior is Replace the PAD.
intact and the
touchscreen is
working properly.
The function is Replace the exit
normal. button.
40