Removing Air Flap Motor M28; Removing Air Flap Switch S60/7; Figure 030-34: Bottom Fan Retaining Screws; Figure 030-35: Evaporator Fan Connection And Top Screws - Miele KF 18 Vi Series Technical Information

Technical Information

Figure 030-34: Bottom Fan Retaining Screws

6. Unclip the evaporator from its retainers and remove it (see Figure 030-32).
7. Disconnect the fan electrical connection. See Figure 030-35, Item 1.
8. Remove the two top fan retaining screws. See Figure 030-35, Item 2.
9. Take out the evaporator fan.

Figure 030-35: Evaporator Fan Connection and Top Screws

4.15

Removing Air Flap Motor M28

Note:
The air flap motor cannot be replaced separately. It must be replaced as
part of the evaporator fan assembly. See Section 030-4.14.
4.16

Removing Air Flap Switch S60/7

Note:
The air flap switch cannot be replaced separately. It must be replaced as
part of the evaporator fan assembly. See Section 030-4.14.
48
KF 18xx/19xx