Table of Contents
Advertisement
Adjusting the interior fittings
Moving the door shelf/bottle shelf
Only move the door/bottle shelves in
the appliance door when they are
empty.
Push the door/bottle shelves up-
wards, then remove them by pulling
them forwards.
Replace the door/bottle shelves at
the required height.
Adjusting or removing the bottle
holder (depending on model)
The non-slip fins of the bottle holder
make bottles more secure when you
open and close the appliance door.
The bottle holder can be moved to the
left or right to create more room for
drink cartons.
The bottle holder can be removed com-
pletely, e.g. for cleaning:
pull the bottle holder up to remove it.
Guide to the appliance
Moving the shelves
The shelves can be adjusted according
to the height of the food.
Pull the shelf forwards and tilt it
downwards to remove it.
Fit the shelf with the rear edge facing
upwards in its new position. The
raised edge at the back must face
upwards to prevent food from touch-
ing the back of the appliance and
freezing to it.
Moving the flexible bottle rack (de-
pending on the model)
The bottle rack can be placed at differ-
ent positions in the refrigeration appli-
ance.
Lift the bottle rack up slightly at the
back and pull it out towards you.
The rear rail must face upwards to pre-
vent bottles from touching the back of
the appliance.
Removing the fruit and vegetable
drawer (VeggieBox)
The fruit and vegetable drawer can
also be removed for loading and un-
loading, and for cleaning.
25
Advertisement
Table of Contents
