KF 18xx/19xx
2.11
Lighting
The bright ClearView lighting system illuminates every nook of the interior
cabinet on each level to achieve maximum exposure of all contents. With this
unique halogen-based lighting system cascading from the top and sides of
the appliance, blind or dark spots are eliminated, making it easy to see and
access virtually all food items.
The lighting automatically switches off after the door has been open for
approximately 5 minutes. This is not a fault. After the bulb has cooled for a
short time it will turn on again. If the light does not come on when the door is
opened briefly, the lightbulb should be changed.
See Section 030-4.45 for instructions on replacing lightbulbs.
2.12
Appliance Status after a Power Interruption
Display: All icons are hidden.
Settings: The most recent settings are saved.
2.13
Temperature Setting/Desired Temperature Display
The refrigerator compartment is factory set to 37°F (an ideal refrigerator
temperature for fresh food is between 32 and 37°F). Dense, cold air is heavy,
so the lowest sections of the appliance, i.e. the SmartFresh drawers, are the
coldest. Likewise, the warmest area of the appliance is at the top of the door.
The freezer is factory set to 0°F.
Refrigerator compartment
Freezer compartment
SmartFresh drawers
Table 030-12: Compartment Temperatures
1
Factory setting: 37°F/3°C
2
Factory setting: 0°F/-18°C
3
Factory setting: 35°F/1.5°C
The nominal temperature is changed in one-degree increments by pressing
the
or
icon is no longer lit. When the maximum settable temperature is attained,
the
icon will no longer be lit. The temperature in the SmartFresh
compartments can be adjusted in service programming mode.
Compartment temperatures
1
2
3
icon. When the minimum settable temperature is reached, the
19
Technical Information
°F
32 to 37
7 to 11
-24 to -14
35
°C
0 to 3
1.5