Table of Contents
Advertisement
Adjusting the interior fittings (refrigerator section)
Adjusting the door/bottle shelf
Only move door/bottle shelves when
they are empty.
Push the door/bottle shelf upwards,
then remove it by pulling it forwards.
Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.
Moving the adjustable shelf/
adjustable shelf with lighting
By adjusting the position of the ad-
justable shelf with lighting in the refri-
gerator section, you can change the il-
lumination in this section according to
your needs.
Stoppers prevent the shelves from be-
ing dislodged by mistake.
The shelves can be adjusted accord-
ing to the height of the refrigerated
goods:
1. Lift it upwards slightly at the front.
2. Pull it forwards a little and lift it until
the notch at the side is in line with
the shelf support. It can then be
raised or lowered to the required
level.
Push the shelf in until it clicks into po-
sition.
54
The raised edge on the protective strip
at the back must face upwards to pre-
vent food from touching the back of
the appliance and freezing to it.
Adjusting the bottle rack
The bottle rack can be placed at differ-
ent positions in the appliance.
Raise the bottle rack slightly at the
front, and pull it forwards a little until
the notch at the side is in line with the
shelf support. It can then be raised or
lowered to the required level.
The rear rail must face upwards to pre-
vent bottles from touching the back of
the appliance.
Stoppers prevent the bottle rack from
being dislodged by mistake.
Advertisement
Table of Contents
