GE ApexPro Service Manual page 89

Revision C
Installation: Completion
Server causes disruption of monitoring function at the CIC Pro.
1. Log in to the Webmin application according to
21.
2. Click the Configuration tab.
3. Click the Run link.
4. Click Stop, next to ApexPro Commands, to stop the ApexPro Telemetry Server
software.
5. Once the ApexPro Telemetry Server software stops, click the Save/Load
Defaults link under the Configuration menu along the left side of the window.
127(
Check to make sure the ApexPro Status is Stopped before continuing this
procedure.
6. Click Restore.
7. Click Browse.
8. Use the Choose File window to navigate to the ApexPro Telemetry Server
backup file you want to restore. Select the file and click Open.
9. Click Restore. The message Restore succeeded displays in the ApexPro Status
field if the restore succeeds.
ApexPro Telemetry Server
2001989-178
"Webmin Logons" on page 2-
3-33