Language Configuration - GE ApexPro Service Manual

Language Configuration

Revision C
Installation: Language Configuration
The default ApexPro Telemetry Server language is English, and is set during
manufacturing. Perform the following procedure to change the ApexPro Telemetry
Server application language, if required.
127(
This procedure requires a VNC connection. See
1. From the ApexPro Telemetry Server desktop, select Start > Run and type cmd.
Verify the Windows command prompt window opens and the title bar is blue,
indicating it is active. If not, click inside the command prompt window.
2. Log off the cic user account and log in as username: cicadm; password:
cicadm1,3,5,7.
3. Type cd ../.. and press Enter.
4. Type cd<space>program<space>files\marquette\ats\pts_0001 and press
Enter.
5. Type gepts_ats_sys<space>-lang=[Language Code] and press Enter.
127(
[Language Code] is the two letter code for the language the ApexPro
Telemetry Server will be configured to use (Example: gepts_ats_sys -
lang=en would configure the ApexPro Telemetry Server to use English).
Choose from the following:
Language Code
en
es
no
ru
hu
sv
fr
de
it
nl
da
pt
pl
6. If the language configuration was successful, the message Success set to
[Language Code] will display in the command prompt window.
7. Restart the ApexPro Telemetry Server enable the new language configuration.
See "Stop/Start/Restart ApexPro Telemetry Server"
8. Log in as user: cicadm; password: cicadm1,3,5,7.
127(
This step will add the new configuration settings to the registry.
9. Log off the cicadm account and log in as cic user.
ApexPro Telemetry Server
2001989-178
"VNC Logon"
Language
English
Spanish
Norwegian
Russian
Hungarian
Swedish
French
German
Italian
Dutch
Danish
Portuguese
Polish
on page 2-29.
on page 2-20.
3-31