GE ApexPro Service Manual page 40

Link Name
Installation
Remote Service
Run
Save/Load Defaults
Settings
Logout
2-24
Equipment Overview: Service Utilities
Webmin Configuration Tab
The following links are found on the Configuration tab.
Used for ApexPro Telemetry Server software upgrade installation.
See "Remote Services Configuration"
parameter configuration.
See "Stop/Start/Restart ApexPro Telemetry Server"
ApexPro Telemetry Server software, and operating system, start, stop and restart.
See "Save/Load Defaults"
and disaster recovery.
Used for ApexPro Telemetry Server IP address, ApexPro mode, tower/unit names and
AC power frequency configuration.
See:
„
"IP Address Configuration"
„
"Setting the Telemetry System Type"
„
"Setting the ApexPro Telemetry Server Tower and Unit Name"
„
"ptsconfig Modify Receiver Command"
Used to log out of Webmin.
ApexPro Telemetry Server
2001989-178
Description
on page 3-24. Used for remote connection
on page 2-29. Used for remote
on page 3-32. Used for system defaults back-up/restore
on page 3-22
on page 3-27
on page 3-29
120A
on page 3-28
Revision C