Sony STR-DN1080 Manual page 93

connections only)
Connecting the receiver to the network using the
wireless LAN antenna (for wireless LAN connections
only)
The following illustration is an example configuration of a home network with the receiver and a
server.
We recommend that you connect the server to the router with a wired connection.
Server (computer, etc.)
Router
Modem
Internet
Note
Audio playback on a server may occasionally be interrupted if you use a wireless connection.
[87] Using Network Features
connections only)
Setting up a wireless LAN connection
Before performing network settings
When your wireless LAN router (access point) is Wi-Fi Protected Setup (WPS)-compatible, you
can easily set the network settings with the WPS button.
If not, you will be required to select or enter the following information. Check the following
information in advance.
The network name (SSID) (*1) of the wireless LAN router/access point
The security key (passkey) (*2) for the network
*1 SSID (Service Set Identifier) is a name that identifies a particular access point.
This information should be available from a label on your wireless LAN router/access point, from the operating
*2
instructions, from the person who set up your wireless network, or from the information provided by your Internet
service provider.
Select [Setup] - [Network Settings] from the home menu.
1
Setting up a wireless LAN connection (for wireless LAN