Sony STR-DN1080 Manual page 118

Signals from the HDMI IN VIDEO 2 jack
VIDEO 2
Signals from the HDMI IN SA-CD/CD jack
SA-CD/CD
Note
The HDMI OUT B/HDMI ZONE jack supports bandwidths up to 9 Gbps if [HDMI Out B Mode] is set
to [Zone] in the [HDMI Settings] menu.
[117] Using the Multi-Zone Features
(Zone 2)
Connecting 5.1-channel speaker system with Zone 2
connection
Connect each speaker as illustrated below.
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
For details on how to connect speaker cables to the receiver, see "How to connect speaker
cables."
Monaural audio cable (not supplied)
Speaker cable (not supplied)
*1 For USA and Canadian models only
*2 For other models
After you have made the Zone 2 connection, set [SURROUND BACK/ZONE2 Priority] to
[ZONE2 Terminals] in the [Speaker Settings] menu (for USA and Canadian models only).
After you have made the Zone 2 connection, set [Surround Back Speaker Assign] to [Zone2] in
the [Speaker Settings] menu (for other models only).
Note
After you have installed and connected your speakers, be sure to select the speaker pattern you
Enjoying sound from speakers located in another room