Sony STR-DN1080 Manual page 181

Select [Language].
2
Select the language you want.
3
Note
When the Control for HDMI function on both the receiver and the TV (BRAVIA TV) is turned on, the
on-screen display language of the receiver is changed simultaneously when changing the language
for the on-screen display of the TV.
[214] Adjusting Settings
Tuning on/off the display for the volume level or sound
field (Auto Display)
This function allows you to turn the information display which appears on the TV screen on or
off when the volume level or sound field, etc. of the receiver is changed.
Select [Setup] - [System Settings] from the home menu.
1
Select [Auto Display].
2
Select [On] or [Off].
3
[215] Adjusting Settings
Setting standby mode (Auto Standby)
You can set the receiver to switch to standby mode automatically when you do not operate the
receiver or when no signals are input to the receiver.
Select [Setup] - [System Settings] from the home menu.
1
Select [Auto Standby].
2
Select [On] or [Off].
3
When you select [On], the receiver switches to standby mode automatically in about 20
minutes if there is no operation.
System Settings
System Settings