Sony STR-DN1080 Manual page 172

When your wireless LAN router (access point) is Wi-Fi Protected Setup (WPS)-compatible, you
can easily set the network settings with the WPS button.
If not, you will be required to select or enter the following information. Check the following
information in advance.
The network name (SSID) (*1) of the wireless LAN router/access point
The security key (passkey) (*2) for the network
*1 SSID (Service Set Identifier) is a name that identifies a particular access point.
This information should be available from a label on your wireless LAN router/access point, from the operating
*2
instructions, from the person who set up your wireless network, or from the information provided by your Internet
service provider.
Select [Setup] - [Network Settings] from the home menu.
1
Select [Internet Settings].
2
Select [Wireless Setup].
3
Select [Wi-Fi Protected Setup (WPS)].
4
Select [Start].
5
Press the WPS button on the access point.
6
The receiver starts connecting to the network.
After the network settings are complete, [
If selecting the network name (SSID) you want
Select the network name (SSID) you want in step 4, enter the security key (or passkey) using
the on-screen keyboard, and then select [Enter] to confirm the security key. The receiver starts
connecting to the network. For details, refer to the messages that appear on the TV screen.
When manually inputting a fixed IP address
Select [New connection registration] - [Manual registration] in step 4, then follow the on-screen
instructions.
If using a (WPS) PIN code
Select [New connection registration] - [(WPS) PIN Method ] in step 4, then follow the on-screen
instructions.
Hint
See [Network Connection Status] when checking the network connection status.
[197] Adjusting Settings
] lights up on the display panel.
Network Settings