Sony STR-DN1080 Manual page 178

Select the setting you want.
3
On: You can turn on this receiver from a paired BLUETOOTH device.
Off: This receiver cannot be turned on from a paired BLUETOOTH device.
Note
When this receiver is in standby mode, the power indicator on the front panel lights up in amber if the
following conditions are met:
[Bluetooth Standby] is set to [On].
A BLUETOOTH device which already exists in the pairing registration information is paired again.
This function works only when [Bluetooth Mode] is set to [Receiver] or [Transmitter].
If you set [Bluetooth Standby] to [On], this receiver turns on when you establish a BLUETOOTH
connection from a BLUETOOTH device (for USA, Canadian and Asia-Pacific models only).
[209] Adjusting Settings
Setting BLUETOOTH audio codecs (Bluetooth Codec -
AAC/Bluetooth Codec - LDAC)
You can enable and disable AAC (Advanced Audio Coding) or LDAC audio.
Select [Setup] - [Bluetooth Settings] from the home menu.
1
Select [Bluetooth Codec - AAC] or [Bluetooth Codec - LDAC].
2
Select the setting you want.
3
On: AAC and/or LDAC audio is available if the BLUETOOTH device supports AAC or
LDAC.
Off: AAC and/or LDAC audio is not available.
Note
When you change these settings, the settings are applied from the next time you connect the
BLUETOOTH device.
These functions work only when the [Bluetooth Mode] is set to [Receiver] or [Transmitter].
While a BLUETOOTH device is connected, the settings of these functions cannot be changed.
Hint
You can enjoy high-quality sound if AAC or LDAC is enabled.
LDAC is an audio coding technology developed by Sony that enables the transmission of High-
Resolution (Hi-Res) Audio content, even over a BLUETOOTH connection. Unlike other BLUETOOTH
compatible coding technologies such as SBC, it operates without any down-conversion of the Hi-Res
Audio content (*1), and allows approximately three times more data (*2) than those other
Bluetooth Settings