Sony STR-DN1080 Manual page 106

[103] Using Network Features
home network
Setting whether to control this receiver from a
controller device on the home network (Home Network
Access Control)
You can check a list of products compatible with a controller on the home network and set
whether or not each product is accessible via this receiver.
Select [Setup] - [Network Settings] from the home menu.
1
Select [Home Network Access Control].
2
A list of registered controllers appears (up to 20 devices).
Select the controller you want to set and press
3
Select the setting you want.
4
Allow: Permits access from the controller.
Block: Blocks access from the controller.
[104] Using Network Features
home network
Enabling automatic access from a newly detected
controller device (Auto Home Network Access
Permission)
You can set whether or not the receiver allows automatic access from a newly detected
controller device on the home network.
Select [Setup] - [Network Settings] from the home menu.
1
Select [Auto Home Network Access Permission].
2
Select [On] or [Off].
3
Setting whether to control this receiver from a device on the
Setting whether to control this receiver from a device on the
.