Sony STR-DN1080 Manual page 112

Select the name of the BLUETOOTH receiver from the [Device List] in the [Bluetooth
4
Settings] menu.
If you cannot find the name of your BLUETOOTH receiver in the list, select [Scan].
Return to the home menu and select the desired input.
5
The sound is output from the BLUETOOTH receiver.
Adjust the volume.
6
Adjust the volume level of the BLUETOOTH receiver first. If the volume level is still too
low, adjust the volume level on this receiver. The volume level of this receiver cannot be
controlled when BLUETOOTH receiver is connected.
MASTER VOLUME on this receiver only work for the BLUETOOTH receiver.
Note
You may not be able to adjust the volume level depending on the BLUETOOTH receiver.
When [Bluetooth] is selected as an input, you cannot set [Bluetooth Mode] to [Transmitter].
You can register up to 9 sets of BLUETOOTH receiver. If a 10th set of BLUETOOTH receiver is
registered, the least recently connected BLUETOOTH receiver will be replaced by the new ones.
This receiver can display up to 15 detected BLUETOOTH receiver in the [Device List].
You cannot change the sound effects or settings in the options menu while transmitting sound.
Some content cannot be output due to copyright protection.
The audio output from the BLUETOOTH receiver may be delayed compared to that from this
receiver because of the characteristics of BLUETOOTH wireless technology.
No sound is output from the speakers or HDMI OUT jacks when BLUETOOTH receiver is
successfully connected to this receiver.
The [Bluetooth] and Home Theatre Control functions are disabled when [Bluetooth Mode] is set to
[Transmitter].
This receiver does not support the NFC connection with BLUETOOTH receiver.
Hint
You can enable or disable the reception of AAC or LDAC audio from the BLUETOOTH device.
You can also switch the [Bluetooth Mode] using BLUETOOTH RX/TX on the remote control.
If the BLUETOOTH device in step 3 is the most recently connected device, you can connect it to this
receiver automatically by simply pressing BLUETOOTH RX/TX on the remote control. In this case,
you do not need to perform step 4.
[112] Using BLUETOOTH Features
(headphones/speakers)
Compatible BLUETOOTH version and profiles
+/– on the remote control and
Listening with BLUETOOTH receiver