Sony STR-DN1080 Manual page 19

"Connecting a TV."
[7] Parts and Controls
Remote control (upper section)
Use the supplied remote control to operate this receiver.
1.
(power)
Turns the receiver on or sets it to the standby mode.
2. Input buttons
Select the input channel connected to the device you want to use.
When you press any of the input buttons, the receiver turns on.
3. BLUETOOTH RX/TX
Switches [Bluetooth Mode] to [Receiver] or [Transmitter].
In [Receiver] mode, the receiver receives and outputs audio from the player.
In [Transmitter] mode, the receiver sends audio to BLUETOOTH headphones/speakers.
4.
FRONT SURROUND
Activates the Front Surround mode and lets you enjoy virtual surround effects using only the
two front speakers.
5.
DSD NATIVE
Activates the DSD Native function.
You can turn on or off this function only when playback on the source device is stopped.
6.
HDMI OUT
Switches the output for two TVs connected to the HDMI OUT A (TV) and HDMI OUT
B/HDMI ZONE jacks. When [HDMI Out B Mode] is set to [Main] in the [HDMI Settings]
menu, output is toggled between [HDMI A], [HDMI B], [HDMI A+B] and [HDMI OFF] each
time the button is pressed. When [HDMI Out B Mode] is set to [Zone], output is toggled
between [HDMI A] and [HDMI OFF] each time the button is pressed.
7. WATCH, LISTEN
Selects [Watch] or [Listen] on the home menu directly. When pressing these buttons on the
Watch or Listen screen, you can move the focus to select the desired input.
8. MUSIC SERVICE
If you have been playing the music on the receiver using Spotify Connect (*1)(*2), you can
resume Spotify playback by pressing MUSIC SERVICE.
9. CUSTOM PRESET 1
Saves and recalls various settings for the receiver. Press to select the custom preset
Remote control