Sony STR-DN1080 Manual page 218

BLUETOOTH Standby [BT STANDBY] (*17)
STBY ON, STBY OFF
System settings [<SYSTEM>]
Remote Start [RM START] (for USA, Canadian and Asia-Pacific models only)
ON, OFF
Auto standby mode [AUTO STBY]
STBY ON, STBY OFF
Network Standby [NET STBY] (for USA, Canadian and Asia-Pacific models only)(*19)
MODE ON, MODE OFF
Version display [VERSION] (*20)
XXX.X.XXXX
Sleep timer [SLEEP]
OFF, 0:30:00, 1:00:00, 1:30:00, 2:00:00
*1 You can select this setting only when you have performed Auto Calibration and saved the settings.
Some parameters or settings may not be available depending on the speaker pattern setting.
*2
*3 XXX represents a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, HTL, HTR, SW).
*4 You cannot select this setting in the following cases:
Headphones are connected.
[Bluetooth Mode] is set to [Transmitter].
*5 You can only select this setting if [SP PATTERN] is set to a pattern with center speaker and front high speakers.
(i.e. 5.1.2 (FH))
You cannot select this setting in the following cases:
*6
Headphones are connected.
[2ch Stereo] or [Multi Ch Stereo] is being used.
A sound field for music is being used.
[Bluetooth Mode] is set to [Transmitter].
*7 You can only select this setting if [SP PATTERN] is not set to a pattern with surround back and height speakers.
(i.e. 5.1, 5.0, 4.1, 4.0, 3.1, 3.0, 2.1, 2.0)
For European and Asia-Pacific models only
*8
*9 You can only select this setting if the speaker is set to [SMALL].
*10 Sometimes the settings are dimmed and cannot be selected.
This setting appears dimmed and cannot be selected except when [FM TUNER] is selected.
*11
*12 You cannot select this setting in the following cases:
[2ch Stereo], [Direct], [Dolby Surround] or [Neural:X] is being used.
Headphones are connected.
*13 You can select this setting only when DTS:X content compatible with the DTS:X Dialog Control function is being
played back.
You can select this setting only when listening to sound from one of the following sources using the Wireless
*14
Multi-Room function:
Devices connected to the HDMI IN, OPTICAL IN, COAXIAL IN, or AUDIO IN jacks
TVs compatible with the Audio Return Channel (ARC) function and connected to the HDMI
OUT A (TV) jack
*15 You cannot select this setting when [HDMI Out B Mode] is set to [Main].
*16 You cannot select this setting when [Bluetooth] function is selected.
You cannot select this setting in the following cases:
*17
[Bluetooth Mode] is set to [Off].
A BLUETOOTH device is connected.
You can only select this setting when [Bluetooth Mode] is set to [Transmitter] and [Bluetooth Codec - LDAC] is set
*18
to [On].
*19 If you agree to use the Chromecast built-in function, this setting automatically switches to [MODE ON].
XXXX represents the version number.
*20
Formats compatible with home networks