Sony STR-DN1080 Manual page 187

Press AMP MENU.
1
The menu is displayed on the display panel of the receiver.
Press / repeatedly to select the menu you want, then press
2
Press / repeatedly to select the parameter you want to adjust, then press
3
Press / repeatedly to select the setting you want, then press
4
To return to the previous display
Press or BACK.
To exit the menu
Press AMP MENU.
Note
Some parameters and settings may appear dimmed on the display panel. This means that they are
either unavailable or fixed and unchangeable.
[226] Adjusting Settings
Viewing information on the display panel
The display panel provides various information on the status of the receiver, such as the sound
field.
Select the input for which you want to check information.
1
Press DISPLAY MODE on the receiver repeatedly.
2
Each time you press DISPLAY MODE, the display will change cyclically as follows:
Index name of the input (*1) - Input you selected - Sound field currently applied (*2) -
Volume level - Stream information (*3)
When listening to FM radio
Preset station name (*1) - Frequency - Sound field currently applied (*2) - Volume level
When receiving RDS broadcasts (for European and Asia-Pacific models
only)
Program service name or preset station name (*1) - Frequency, band and preset number -
Sound field currently applied (*2) - Volume level
Index name appears only when you have assigned one to the input or preset station. Index name does not appear
*1
if only blank spaces have been entered or it is same as the input name.
Using the menu on the display panel
.
.
.