Sony STR-DN1080 Manual page 161

[179] Adjusting Settings
Synchronizing audio with video output (A/V Sync)
You can delay the output of audio to minimize the time gap between audio output and a visual
display.
This function is useful when using a large LCD or plasma monitor or a projector. You can set
the function for each input independently.
Select [Setup] - [Audio Settings] from the home menu.
1
Select [A/V Sync].
2
Select the setting you want.
3
0 ms – 300 ms: You can adjust the delay from 0 ms to 300 ms in 10 ms intervals.
HDMI Auto: The time gap between the audio output and visual display of a TV
connected via an HDMI connection will be adjusted automatically. This feature is
available only when the TV supports the A/V Sync function.
Note
The receiver may play signals at a lower sampling frequency than the actual sampling frequency of
the input signals, depending on the audio format.
This function is not available in the following cases:
[Bluetooth Mode] is set to [Transmitter].
[DSD Native] is set to [On] and DSD signals are being played back.
[180] Adjusting Settings
Selecting the language of digital broadcasts (Dual
Mono)
You can select the language you want when listening to a digital broadcast with dual audio. This
function only works for Dolby Digital sources.
Select [Setup] - [Audio Settings] from the home menu.
1
Select [Dual Mono].
2
Select the setting you want.
3
Main: Sound in the main language will be output.
Sub: Sound in the sub language will be output.
Main/Sub: Sound in the main language will be output through the front left speaker
and sound in the sub language will be output through the front right speaker
Audio Settings
Audio Settings